We tighten the side fixing screws
Posted: Thu Feb 06, 2025 9:12 am
Step 3. Apply silicone sealant to the back of the profile and attach it to the wall with screws.
Apply a layer of sealant
Secure the profile
Step 4. Fix the glass on the installed profile, tighten the fasteners, but not too tightly, so as not to block the glass panel completely.
Insert the glass into the profile
Step 5. The remaining gap is necessary for indonesia mobile database the seal - it is put on the lower part of the glass, after which the panel can be completely fixed by tightening the screws until they stop.
There should be a gap between the glass and the bathtub so that the seal can be put on.
Step 6. Place special insulating caps on the fasteners.
Install decorative covers
The gaps that remain between the screen elements and the wall should be filled with silicone sealant. It takes about a day for the composition to harden, that is, it is better not to use the bathroom during this period.
Apply silicone sealant
Level the sealant
Use the shower within 24 hours, when the sealant has dried.
Apply a layer of sealant
Secure the profile
Step 4. Fix the glass on the installed profile, tighten the fasteners, but not too tightly, so as not to block the glass panel completely.
Insert the glass into the profile
Step 5. The remaining gap is necessary for indonesia mobile database the seal - it is put on the lower part of the glass, after which the panel can be completely fixed by tightening the screws until they stop.
There should be a gap between the glass and the bathtub so that the seal can be put on.
Step 6. Place special insulating caps on the fasteners.
Install decorative covers
The gaps that remain between the screen elements and the wall should be filled with silicone sealant. It takes about a day for the composition to harden, that is, it is better not to use the bathroom during this period.
Apply silicone sealant
Level the sealant
Use the shower within 24 hours, when the sealant has dried.