Laying modular parquet
Posted: Sun Feb 09, 2025 3:35 am
modular parquet with plywood covering;
modular parquet with veneer coating;
modular parquet with a covering of parquet wooden slats.
Parquet boards can vary in size and thickness. On average, the side of a standard panel is 40-80 cm, and the width is from 2 to 4 cm.
If regular piece parquet requires very careful preparation of the base, then its modular analogue is not so demanding. It is enough to perform rough preparation to exclude strong differences or unevenness. This is due to the fact that individual elements are quite thin, and the board is a multi-layer structure.
But there are some nuances here. Inexpensive modular parquet has a small thickness. Therefore, it is not recommended to lay it directly on the floor joists. To extend the service life, you need to make a concrete screed. If the module thickness is 3 cm or more, then installation directly on the joists is allowed.
Advice: you can find modular parquet made using extrusion pressing technology on sale. Despite the fact that it is a fairly thick and wear-resistant floor covering, its fracture strength is low. Therefore, it is allowed to be installed only on a flat, solid surface.
Laying modular parquet on the floor is done quickly thanks to a special design. On each side of the parquet board there are grooves designed for hammering in wooden dowels intended for this purpose. They are sold complete with parquet, often made of coniferous wood.
There are also models in which the modular macedonia mobile database has grooves on two sides and projections on the other two. Thus, they can be immediately fastened without using additional connecting elements. Such flooring material is less common, but it allows you to significantly save assembly time.
Although modular parquet is produced on an industrial scale, it is always possible to order a custom design. The arrangement of the boards on the floor in this case will require more attention. To create a correct and beautiful pattern. But even this work can be done independently, without experience and additional skills.
Modular parquet walnut
When choosing fasteners, you need to focus on the base of the floor. If the parquet is placed on a concrete screed, then parquet glue or mastic will be required. Self-tapping screws are suitable for fixing the panels to wooden joists or plywood.
Laying modular parquet on wooden joists. Stages of work
This method of laying is chosen if the existing base is very uneven, and there is no possibility or desire to make a screed.
modular parquet with veneer coating;
modular parquet with a covering of parquet wooden slats.
Parquet boards can vary in size and thickness. On average, the side of a standard panel is 40-80 cm, and the width is from 2 to 4 cm.
If regular piece parquet requires very careful preparation of the base, then its modular analogue is not so demanding. It is enough to perform rough preparation to exclude strong differences or unevenness. This is due to the fact that individual elements are quite thin, and the board is a multi-layer structure.
But there are some nuances here. Inexpensive modular parquet has a small thickness. Therefore, it is not recommended to lay it directly on the floor joists. To extend the service life, you need to make a concrete screed. If the module thickness is 3 cm or more, then installation directly on the joists is allowed.
Advice: you can find modular parquet made using extrusion pressing technology on sale. Despite the fact that it is a fairly thick and wear-resistant floor covering, its fracture strength is low. Therefore, it is allowed to be installed only on a flat, solid surface.
Laying modular parquet on the floor is done quickly thanks to a special design. On each side of the parquet board there are grooves designed for hammering in wooden dowels intended for this purpose. They are sold complete with parquet, often made of coniferous wood.
There are also models in which the modular macedonia mobile database has grooves on two sides and projections on the other two. Thus, they can be immediately fastened without using additional connecting elements. Such flooring material is less common, but it allows you to significantly save assembly time.
Although modular parquet is produced on an industrial scale, it is always possible to order a custom design. The arrangement of the boards on the floor in this case will require more attention. To create a correct and beautiful pattern. But even this work can be done independently, without experience and additional skills.
Modular parquet walnut
When choosing fasteners, you need to focus on the base of the floor. If the parquet is placed on a concrete screed, then parquet glue or mastic will be required. Self-tapping screws are suitable for fixing the panels to wooden joists or plywood.
Laying modular parquet on wooden joists. Stages of work
This method of laying is chosen if the existing base is very uneven, and there is no possibility or desire to make a screed.