What to consider when decorating interiors
Posted: Sun Feb 09, 2025 10:11 am
First, they do the facing without the last stone according to the markings. Then they glue the wallpaper and lay the last tiles with an overlap.
First they glue the wallpaper, then they do the cladding.
The first method is:
surface preparation;
its marking;
facing, without the last stones belgium mobile database the future wallpaper;
pasting cut-out wallpaper according to the intended design;
laying the last elements. They should lie on the wallpaper by 2 mm.
Second way:
it is necessary to prepare the surface and cover it with a primer;
then draw the borders of the wallpaper and tiles. Make markings for decoration;
they are gluing wallpaper;
After this, the surface is covered with brick-like slabs.
Don't forget about the seams between the rows. If glue gets on the front side of the tile or on the wallpaper, it should be wiped off immediately with a rag or sponge.
When working, you need to take into account the following nuances:
Don't forget about the gaps between the decorative bricks.
Before doing the cladding on the surface, you need to choose the right adhesive solution. If the wall is cemented, choose cement-based glue (it has shrinkage), if it is gypsum plasterboard - gypsum plaster.
If the surface is made of plasterboard, you need to make sure that it can withstand the weight of the tiles and glue. How well is the metal lathing made?
There is no need to make the cladding from floor to ceiling with decorative elements if the plasterboard is glued to the surface. You can do it in fragments - around the door or below.
First they glue the wallpaper, then they do the cladding.
The first method is:
surface preparation;
its marking;
facing, without the last stones belgium mobile database the future wallpaper;
pasting cut-out wallpaper according to the intended design;
laying the last elements. They should lie on the wallpaper by 2 mm.
Second way:
it is necessary to prepare the surface and cover it with a primer;
then draw the borders of the wallpaper and tiles. Make markings for decoration;
they are gluing wallpaper;
After this, the surface is covered with brick-like slabs.
Don't forget about the seams between the rows. If glue gets on the front side of the tile or on the wallpaper, it should be wiped off immediately with a rag or sponge.
When working, you need to take into account the following nuances:
Don't forget about the gaps between the decorative bricks.
Before doing the cladding on the surface, you need to choose the right adhesive solution. If the wall is cemented, choose cement-based glue (it has shrinkage), if it is gypsum plasterboard - gypsum plaster.
If the surface is made of plasterboard, you need to make sure that it can withstand the weight of the tiles and glue. How well is the metal lathing made?
There is no need to make the cladding from floor to ceiling with decorative elements if the plasterboard is glued to the surface. You can do it in fragments - around the door or below.