Ventilation can be provided in one of the following ways:

[zihadhosenjm40]

Before installing the soffit sheets, make sure that the bottoms of the rafters do not protrude. If this is not the case, they need to be slightly filed down to attach the soffits to a flat surface.

Specially cut sheets are installed near the bend of the soffits and on the edges. Corners are nailed along the outer edge of the soffits to cover the holes. The places where the screws were screwed in must be painted over to prevent rust from forming there.

Ventilation
When carrying out such work, it is necessary not to forget to saudi arabia mobile database ventilation of the roof.

High humidity can cause damage to parts This may be interesting! In the article at the following link, read about roof gables: from the choice of materials to installation features.


One of the simplest ways is to leave a small gap between the finished paneling and the wall. For this purpose, it is enough for the gap to be one or one and a half centimeters wide.

If lining is used and in some other cases, ventilation grilles can be built in instead of some boards.

When using soffits, perforated material can be used.

In the case where the overhang is covered with boards, ventilation can be provided by making gaps between the boards. In such cases, it is usually one centimeter.