The optimal type of foundation for this would be a strip foundation.

[zihadhosenjm40]

Gate for metal fence
DIY Wooden Gate for Fence
Features of installing fencing on a slope
For sites located on slopes or in uneven terrain, it is important to design the site in such a way as to compensate for the sharp changes in elevation.


Study in detail the types of tape and the pouring sequence.

The slope must be uniform. Sections are created with philippines mobile database same height of rise and fall.

The fence is mounted in two ways:

Repeating the slope contour. It is performed on steep hills and slopes. The lintels are fixed not horizontally, but parallel to the slope. The sections can be of different heights, but the same upper level is maintained.
Stepped fence. Suitable for estates with gradual differences in height. Gives the fence an aesthetic appearance. The posts are mounted in steps of 2-2.5 m so that the transverse joists can be secured between them. The average height of the difference per section is the total height of the difference in the plot, divided by the number of differences between the posts.
When the differences in ground level are less than the depth of the foundation, it will be easier to arrange a foundation for a fence on a slope. The concrete base of the foundation is made in the form of steps, the top is parallel to the ground.

Photo gallery of finished fences
Below are presented different methods of fastening corrugated sheets to a fence, the most original combinations with other materials.